Metal Hoses

Product Details:

Hydroflex Pipe Pvt ltd manufacturer of SSLance Hose for Steel Plantfor blast lance in steel plant, with double wire braided with or without inner interlocked hose with flange connection and all parts, a corrugated will be cleaned, oil and grease free, Lance hose application in steel plant and we have supplied Oxygen lance hoses to many steel plant in India.

The Pressure Loss Hose in corrugated hoses is 100% higher than in new welded steel pipes because corrugated hoses are not smooth. This means that in the case of corrugated hoses an increase in diameter of 15% is required to reduce the pressure loss to the value of the pressure loss in steel pipes. The chart shows the approximate pressure drop for each size of corrugated hoses related to a flow rate where water is the fluid. To utilize the chart, read off on the base line the flow rate required. Where vertical line from the selected point on the base line intersects the nominal bore line, the pressure drop is shown on the vertical axis, corresponding to the point inter section.

Product Details:

When pressure is applied, unbraided hose tends to elongate axially to restrain this, an external layer of Stainless Steel Braided Hose is provided. The braid also makes the assembly pressure compatible. Sometimes two or even three layers of braiding are provided for high-pressure applications. The braiding is highly flexible and follows the movement of the hose The braid is normally manufactured in SS 304 wire. How ever SS 316 and 321 braids can also be manufactured. We also supply wire braid in different configurations as per customer specifications. Stainless Steel Flexible Pump Connectors are designed for mechanical equipment to isolate vibration, relieve stresses, reduce noise, absorb small movements and to facilitate installation. Flexible pump connectors to use suppress vibration from a pump, to absorb intermittent lateral movements in pipelines and to compensate for subsidence when pipelines cross building movement lines.Stainless Steel Flexible Pump Connectors are manufacturing in austenitic steel ANSI 321 (DIN EN 1.4541) 8 ANSI 316L (DIN EN 1k404) grades with over ANSI 304 (DIN EN 1.4301) / ANSI 316L (DIN EN 1.4404) single or double wire braided. Hoses conform to BS 6501, Part-12004 / ISO 10380 2003. 

Other Details :

• Hose Material AISI 321 (DIN EN 1.4541)/A151316L (DIN EN 1.4404)
• Braid Material AISI 304 (DIN EN 1.4301)/ AlS1316L (DIN EN 1.4404)
• Braid Type Single wire braid / Double wire braid for higher pressure
• Hose Size DN 6 (1/4" NB) to DN 100 (4" NB)
• Hose Length Overall 10", 11", 12", 13", 14", 15", 16", 18"
• End Fittings Male fix type SCH 40 pipe threads BSP/BSPT/ NPT threads, Hexagonal Male fix type pipe threads BSP/BSPT/ NPT
• End Fittings Material CS / AISI 304 (DIN EN 1.4301)/ AlS1316L (DIN EN 1.4404)
• Working Pressure 1800 PSI ( 124 BAR ) @ 20 Degree C to 232 PSI ( 16 BAR) @ 20 Degree C

Note

• The above technical details are subject to change without notice.
• We can also supply the above hoses for higher pressures.
• The above values apply only to braided hoses and assemblies at the ambient temperature of 20 Deg C.
• The burst pressure is 4 times of the max working pressure.
• Stainless Steel Braided Flexible Pump Connectors-Male Threaded / Hexagonal Fixed Male Threaded

Product Details:

We offer Braided Hose to our customers.

Other Details :


The above details are subject to change without notice. We can also supply the above hoses for higher pressures. The above values apply only to braided hoses and assemblies at ambient temperature of 20 Deg C, The burst pressure is 4 times of the max. working pressure.

Product Details:

Hydroflex Pipe Pvt Ltd. is manufacturing annular corrugated stainless steel flexible metallic hose with inner lining of PTFE this hoses are applied for chemical industry, Flexible Hose with plain interior surface PTFE lining are the ideal hose version for application in conveying and filling processes. Hoses conform to BS 6501, Part-1 2004.

We will provide completely PTFE lined smooth interior surface of the metal hose and sealing areas also.

Our PTFE liner is available minimum 2 mm wall thickness and also available 3 & 4 mm wall thickness.

Annular Corrugated Metallic Flexible Hose with PTFE Lining Specification

• Hose Material AISI 304 (DIN EN 1.4301) / AISI 321 (DIN EN 1.4541) /AISI 316L (DIN EN 1.4404)
• Braid Material AISI 304 (DIN EN 1.4301)/ AISI 316L (DIN EN 1.4404)
• Braid Type Single Wire Braid
• Hose Size DN 25(1" NB) to DN 200(8" NB)
• Hose Length 0.300 Mtr. to 3 Mtr.
• End Fittings Fixed Flange / Swivel Flange as per ANSI 816.5 150#, 300# / DIN PN 10, PN 16, PN 40
• End Fittings Material CS A105 / AISI 304 (DIN EN 1.4301) A182 / AISI 316L (DIN EN 1.4404) A182
• Size DN 25 (1" ID) to DN 200 (8" ID)

Product Details:

We offer Metallic Flexible Hoses to our customers.

Advantages of Flexible Metal Hose :

• High physical strength combined with light weight.
• Suitable for wide temperature range (-200 DegreeC to 550 DegreeC)
• Good corrosion resistance, Resistance to fire, moisture, abrasion and penetration.
• Absorbs vibration and noise from pumps, compressors, engines etc.
• Compensates for intermittent or constant movement. Compensates for thermal expansion or contraction of piping. Corrects problems of misalignment.
• A flexible and quick alternative for rigid piping in difficult locations.

Other Details :

• Hose Material AlSI 321 (DIN EN 1.4541) /AISI 316L (DIN EN 1.4404)
• Braid Material AISI 304 (DIN EN 1.4301)/AISI 316L (DIN EN 1.4404)
• Braid Type Single wire braid / Double wire braid for higher pressure
• Hose Size DN 15(1/2" NB) to DN 300 (12" NB)
• Hose Length Overall 8", 9", 10", 11", 12", 14", 15", 16", 18"
• End Fittings Fixed Flange/Swivel flange as per ANSI B16.5 150#, 300#/DIN PN 10/PN 16/PN 40
• End Fittings Material CS A105/AISI 304 (DIN EN 1.4301) A182/ AISI 316L (DIN EN 1.4404) A182
• Working Pressure 507 PSI (35 Bar) @ 20 Deg C to 160 PSI (11 Bar) @ 20 Deg C

 

Product Details:

Stainless Steel Hose are manufacturing in Authentic Steel ANSI 321, 316, 316L & 304 grades conforming to BS 6501, Part-1. The Annular Corrugated Metallic Hose body provided the flexibility and pressure tight core of the assembly. We also manufacture highly flexible close -pitch hoses for special applications.

Product Details:

Hydroflex Pipe Pvt Ltd. is manufacturing annular corrugated High-Pressure SS Flexible Hose for high-pressure gases, We are using highly flexible annular corrugated stainless steel flexible metallic hoses ANSI 316L with ANSI 304 double wire braiding Size: DN 6 is 400 bar working pressure and bursting pressure is 1200 bar. We will provide end fittings both end 1/4" \IPT female type and also provide fittings suitable for gas cylinders valve, Hose conforms to BS 6501, Part-1:2004 / ISO 10380:2003.

High Pressure Flexible Hose Assemblies for Gases Specification:

• Hose Material: AISI 316L (DIN EN 1.4404)
• Braid Material: AISI 304 (DIN EN 1.4301)/ AlS1316L (DIN EN 1.4404)
• Braid Type: Double Wire Braided
• Hose Size: DN 6 (1/4" NB /6.4 mm ID)
• Hose Length Overall: 500 mm, 750 mm, 1000 mm, 1500 mm, 2000 mm, 3000 mm
• End Fittings: 1/4" NPT Female Fixed/ Suitable for Gas Cylinders Valve
• End Fittings Material: AISI 316L (DIN EN 1.4404)
• Over Wire Rope: AISI 304 (D1VN 1.4301) /AISI 316L (DIN EN 1.4404)
• Max. Working Pressure: 400 Bar @ 20 Degree C
• Testing Pressure: 600 Bar
• Burst Pressure: 1200 Bar

Product Details:

We offer Flexible Hoses to our customers.

Note :

• Flexible pump connector is designed the test pressure is 1.5 times of the max. Working pressure.
• The burst pressure is 4 times of the working pressure.
• They are used for full vacuum and operating temperature of -200 Degree C to +700 Degree C.
• Flexible Pump Connectors are not suitable for absorbing Axial Movement.
• We are also manufacturing higher pressure Pump Connectors as per customer's specification.

 

Advantages of Flexible pump connector : 

• Absorbs misalignment, vibration and sound.
• Withstands high pressure.
• Excellent corrosion-resistance.
• Excellent for use with moderate many solvents, chemicals, most oils and grease.

Product Details:

Being a respective organization in this domain, we have been manufacturing and supplying the best quality of Corrugated Flexible Hose.

Product Details:

Being a respective organization in this domain, we have been manufacturing and supplying the best quality of Corrugated Metal Hose.

Product Details:

Stainless Steel Hoses are available in various sizes and dimensions as per the requirements of the clients. The specific usage of the Hose often decides the grade of material to be used. Manufacturing these Hoses involves the use of tested Stainless Steel strips in compliance with AIS 304/316 L / 316 or 321. These Hoses can be extensively used where high temperatures and high pressures are involved. We manufacture these Stain Steel Hoses as per the flexibility and client’s requirement at reasonable prices.

Product Details:

Banking on our vast domain expertise, we offer the functionally advanced array of SS Metallic Hose that are acclaimed for high quality and seamless performance. Our entire product range ensures easy assembling and disassembling and is offered with customized solutions.

Product Details:

We manufacture superior quality Steam Hoses that can hold out a temperature up to 205°C. The inner tube of the hose is made from EPDM Rubbers that are available in Steel Wire Braiding or Copper Wire Braiding. These can be modified as per customers specifications as these are widely known for its durability, quality, strengths and long lasting services. We make these products available at the competitive market prices.

Product Details:

Stainless Steel Flexible Hose Annular are manufacturing in Authentic Steel ANSI 321, 316, 316L & 304 grades conforming to BS 6501, Part-1. The Annular Corrugated Metallic Hose body provided the flexibility and pressure tight core of the assembly. We also manufacture highly flexible close -pitch hoses for special applications.

Product Details:

Being a respective organization in this domain, we have been manufacturing and supplying the best quality of SS Silver Hose.

Product Details:

Hydroflex Pipe Pvt Ltd. is manufacturing Jacketed Flexible Hose assemblies. The Inner annular corrugated stainless steel flexible metallic hose conveys the fluid and jackets annular corrugated stainless steel flexible metallic hose for heating or coolant fluid or protective the hose and both Inner and jacketed hoses are highly flexible.

We are using our annular corrugated stainless steel flexible metallic hoses ANSI 321 / 316L with ANSI 304 single wire braiding. We will provide both the end flange fittings swivel or fixed type and for inlet & outlet heating or cooling fluid end connection we will provide flange end or threaded end at an offset angle of 180 Degree, Hoses conform to BS 6501, Part-12004.

Application

• Fertilizer Industries, Refineries Industries, Petrochemicals Industries, Chemical and Pharmaceuticals Industries.

Jacketed Flexible Hose Assemblies Deatils :

• Hose Material AISI 321 (DIN EN 1.4541)/AISI 316L (DIN EN 1.4404)
• Braid Material AISI 304 (DIN EN 1.4301)/AISI 316L(DIN EN 1 .4404)
• End Falings on Flange End Swivel Type /Fix Type as per ANSI B16.5
• Jacketed Hose 150#, 300 #/DIN PN 10, PN 16, PN 40 or Fix male threaded BSP/BSPT/NPT
• End Fitting Material CS A105/AISI 304(DIN EN 1.4301) A182/AISI 316L (DIN EN 1.4404) A182
• Jacketed hose fitting permissible Operating Temp for inner & jacketed hose 300 Deg C